煤 /重油加氢共炼中SDBS对煤担载铁镍催化剂的改性效果

以广西褐煤为载体煤,铁盐和镍盐为活性组分,考察了以十二烷基苯磺酸钠(SDBS)作为表面活性剂,对沉淀-氧化法制备煤担载型铁镍催化剂(FeNi/C)的影响以及制备的催化剂在煤/重油加氢共炼中的反应性能。采用XRD和TEM分析了FeNi和FeNi-SDBS的物相组成与微观形貌变化,并以SEM-mapping手段对比了Fe元素和Ni元素在FeNi/C及FeNi-SDBS/C表面的分散效果,采用高压釜实验评价了不同催化剂的反应性能,并对反应后的固体产物采用元素分析、FTIR和SEM进行组成和结构性质研究。结果表明:SDBS的加入显著降低了催化剂的平均粒径,α/γ-FeOOH和Fe0.67Ni0.33OOH等活性相的晶体结构特征减弱,在载体煤上得到了更好的分散效果;FeNi-SDBS/C催化剂相比FeNi/C催化剂有更高的油收率和干基无灰煤转化率,催化活性明显提高;采用SDBS改性的催化剂反应后得到固体产物的n(H)∶n(C)高、脂肪链长度低、芳环取代度大、结构疏松且平均粒径小,表面改性后的FeNi-SDBS/C催化剂拥有更强的促进煤加氢转化和抑制体系缩合生焦的作用。     

喷丸奥氏体耐热钢抗蒸汽氧化性的研究与使用现状

奥氏体钢内壁喷丸处理作为一种新的提高材料抗蒸汽氧化性的技术，在超超临界火电机组受热面管的使用越来越广泛和成熟。概述了传统奥氏体钢在蒸汽氧化过程中氧化皮的形成结构，材料临界Cr含量 对富Cr层形成的影响，以及氧化皮结构与临界Cr含量 的关系。奥氏体钢内壁喷丸处理提高抗蒸汽氧化性的机理为：喷丸在管子内表面形成一层微米级厚度的喷丸层，喷丸层中晶粒碎化、晶格畸变、位错增多，在蒸汽氧化过程中，为基体内的Cr原子向表面扩散提供短路通道，使喷丸层表面Cr浓度提高，以形成富Cr层，减小氧化速率，提高抗蒸汽氧化性。归纳得出国内外关于喷丸奥氏体钢与传统钢管在600~750 ℃温度范围内，抗蒸汽氧化性的顺序依次为：600~700 ℃温度下，喷丸SUPER304(S30432)>喷丸TP347H≈喷丸TP321H≈TP310HCbN(HR3C)>SUPER304≈TP347HFG>TP304≈TP347H>TP321H；700~750 ℃下，TP310HCbN(HR3C)>喷丸TP347H>喷丸TP321H。同时归纳了喷丸工艺中，各因素对喷丸效果的影响，喷丸层质量的金相和硬度评价方法，以及目前喷丸奥氏体钢的实际应用现状。最后分析了喷丸奥氏体钢关于加工、焊接以及使用寿命等仍需研究解决的问题，展望了喷丸工艺向马氏体钢的推广使用。     

Photocatalytic conversion of ethane: status and perspective

Ethane (C₂H₆) is a main component of natural gas and a notable contributor to photochemical pollution and ozone production in the atmosphere. It is important to convert ethane to useful chemicals. The photocatalytic conversion of ethane is promising but challenging. As the first review article in this area, we summarize the recent important progresses in photocatalytic ethane conversion, with an emphasis on (1) homogeneously functionalization and (2) heterogeneously partial oxidation of ethane. Furthermore, the challenges and future directions are provided for the photocatalytic conversion of ethane.     

Photo-to-thermal conversion and energy storage of lauric acid/expanded graphite composite phase change materials

To make better use of solar energy, lauric acid/expanded graphite (LA/EG) composite phase change materials (PCMs) were synthesized to collect and store solar energy as latent heat thermal energy. The results of thermal characteristics show that when the mass fraction of EG is 5%, 10%, and 15%, the latent heat of LA/EG is 164.5, 156.9, and 148.0 J/g, and the thermal conductivity is 2.73, 7.98, and 10.54 W/(m·K). Leakage test shows that LA/EG PCMs with EG mass fraction of 10% and 15% are form stable after phase change. One thousand thermal cycles prove good thermal reliability of LA/EG. TG analysis indicates LA/EG PCMs have good thermal stability within operating temperature range. The Ultraviolet-visible spectra reveal that the absorbance of LA/EG composite PCMs would increase as the mass fraction of EG increases. Photothermal conversion experiment results indicate that the photothermal conversion efficiency of LA/EG composite PCMs increases as the mass fraction of EG increases, and the efficiency can reach 95% when the mass fraction of EG is 15%. Moreover, it was also found that the process of photothermal conversion can be accelerated with stronger illumination intensity or smaller heat transfer size. All the results show that the prepared LA/EG PCMs can convert solar energy into thermal energy and store it in the form of latent heat at the same time, which indicates it has promising prospect in the application of solar energy conversion and storage.     

基于光谱尺度空间与管道滤波的红外目标检测

为了准确地从复杂干扰背景下检测出真实弱小目标，本文引入视觉显著性，设计了基于快速光谱尺度空间与动态管道滤波的红外目标检测算法。基于真实目标与背景内容之间的整体差异，引入快速光谱尺度空间与阈值分割技术，设计视觉显著性机制，对红外图像完成处理，输出全局显著性映射，以高效过滤干扰背景内容。考虑目标与背景的局部特征差异，构建自适应局部对比度增强机制，对粗检测结果实施处理，获取对应的局部显著性映射，改善视觉显著性区域内目标的对比度。引入高斯差分理论，通过估算每一帧红外图像中的目标像素直径，形成动态管道滤波，充分消除虚警，准确识别出弱小目标。多组实验数据显示：较已有的红外目标检测技术而言，在各种不同的复杂背景干扰下，所提算法呈现出更好的检测能力，拥有更理想的接收机工作特性ROC曲线。     

功能追随空间：多尺度层级网络塑造的城市中心

城市商业功能的分布与道路空间结构息息相关。本文以北京内城为例,应用空间句法模型在城市和街区两个尺度上分析了商业功能的聚集和演变规律。其中在城市尺度基于80年跨度中四个时间节点的商业分布数据分析了10个商业中心,在街区尺度上基于2005和2015年的实地调研的商铺数量,分析了前门、东四和西四三个中心区内的各街道段上的商业分布受城市和局域层级网络影响的程度。结论验证了空间句法参数能够有效地在街道精度上分析商铺数量,但各案例街区受两种网络影响程度差异较大。     

Selective hydrogenation of levoglucosenone over Pd/C using formic acid as a hydrogen source

Selective hydrogenation of lignocellulosic biomass-derived chemicals is of great importance for future energy and chemical supply. So far formic acid is considered as one of the most promising materials for hydrogen storage. Herein, we report a novel pathway for the hydrogenation of Levogluosenone (LGO), a biorenewable platform chemical, to dihydrolevoglucosenone (Cyrene) and levoglucosanol (Lgol) using formic acid as a hydrogen source. Testing with typical hydrogenation catalysts indicated the crucial influence of the type on reaction selectivity and identified Pd/C as the most suitable catalyst. Among solvents screened, THF in combination with Pd/C showed the best performance for LGO hydrogenation, producing Cyrene in >99% yield at a low temperature (60 °C). Nevertheless, hydrogenation of Cyrene to Lgol required a harsher condition as a result of the difficult reduction property of its C=O bond. Elevating the reaction temperature to 180 °C and increasing double Pd dosage enabled a high yield of Lgol, attaining to 94.8%.     

原子及近原子尺度制造——制造技术发展趋势

探讨了制造技术发展趋势，论述了制造历史发展的三个阶段，指出原子及近原子尺度制造（ACSM）是下一代制造技术的主流发展趋势，对未来科技发展和高端元件制造具有重要意义。详细分析阐述了ACSM的主要研究内容及关键科学问题，并提出了相应的建议和措施。     

钢板表面花斑缺陷的分析与控制

针对山东钢铁集团莱芜分公司生产的中厚板表面存在的"花斑"缺陷,分析了其成因,通过优化加热工艺、控制加热炉内氧化气氛、降低钢中Si含量、规范除鳞使用等一系列措施,有效提升了钢板的表面质量,存在"花斑"问题钢板的比例由攻关前17%降低为3%。     

热轧除鳞系统节能方案

针对热轧除鳞系统普遍存在的能源浪费严重的问题,设计了基于预测模型的变频节能方案,通过板坯位置预测、除鳞时间预测、除鳞水量预测和除鳞泵转速控制,合理利用轧制间歇时间使水泵电机变频降速,模拟计算结果表明,可使除鳞电耗降低23.57%。